This is the ultimate gauge setup a RX8 can need. You name it, this thing can measure it and display it.
EVEN IF your car didn't come with sat-nav fitted, this kit can still be installed. You either buy a pre-modded sat nav hood at the same time with the kit, or mod your existing one.
Any(or all of these) can be displayed as a numerical value, a needle-style or a vertical/horizontal bar:
This big screen mounts where the OEM navigation screen used to sit. Don't worry if your car did not come with GPS sat-nav, I can provide you with all the parts needed to install it(including the hood itself)!
Speaking of the hood, it will remain electronically actuated. At a press of a button, it will fold and open just like Mazda intended it to. The tilt button also toggles between 5 positions.
If driven at night and so desired, the screen can be dimmed automatically so it won't bother you.
The kit in its most basic form includes the following:
Optional extras:
- another 2.3" touchscreen that sits in the ashtray, also displays whatever you need it to
- Accurate Gauge Cluster kit - can be integrated with this system to turn the needles inside the OEM cluster into real gauges!
- what else you may wish for and I didn't think of it yet!
Have a look at it go! Remember, it doesn't have to look like this; the units of measurement(imperial or metric), layout, font, size, color, position, style, everything can be customised!
If you don't like it, you are free to tell me what to change or even better - build it yourself using a software you download on your PC!
Please remember that this product is made to order, to your spec and to your demands. This is why the price may seem high, but rest assured that the price is mostly for that big 7" at ~130$ a piece. Then I have to source a RX8 OEM navigation hood which goes for another ~200$ or so, then the price of custom made electronics and so on and so forth.
Installation instructions are provided as a Word document with plenty of pictures.
You can choose to buy a pre-modded sat-nav hood from this site, and the installation time will go down by 2-3 hours. If your car did not have sat-nav from factory, this is the best choice for you.
If your car had sat-nav, you can choose to install the screen yourself; or you can send your hood towards me and you will receive it back with the screen installed. There are install instructions on how to mod your existing hood.
When you select extra sensors, please note that I will include all the wiring needed and any mounting adaptors required. For example, for oil temp/pressure, I offer an oil filter adapter. For boost/EMAP, the sensor has a 1/8NPT you screw in your intake. For fuel pressure/temp, I can offer a 5/16 quick disconnect inline adapter.
After payment, please get in touch with me to discuss all details.
You can find me at ciprianrotary@gmail.com, on my FB page at this link or by whatsapp.
All such items are made to order.
EVEN IF your car didn't come with sat-nav fitted, this kit can still be installed. You either buy a pre-modded sat nav hood at the same time with the kit, or mod your existing one.
Any(or all of these) can be displayed as a numerical value, a needle-style or a vertical/horizontal bar:
- coolant temperature (from factory sensor or external one)
- oil temperature (external sensor)
- exhaust gas temperature (factory sensor)
- intake air temperature (factory sensor)
- fuel temperature (external sensor)
- oil pressure (external sensor)
- boost pressure(pre throttle body and/or post throttle body) - for boosted engines - external sensor
- turbine inlet manifold pressure/exhaust backpressure (TIP/EMAP) - for boosted engines - external sensor
- fuel pressure (external sensor)
- air fuel mixture (AFR) (factory sensor)
- short term fuel trim (factory ECU parameter)
- long term fuel trim (factory ECU parameter)
- throttle body opening angle (TPS) - factory ECU parameter
- engine load (factory ECU parameter)
- timing advance (factory ECU parameter)
- battery voltage (factory ECU parameter)
- instant fuel economy (factory ECU parameter)
- fuel tank level (factory sensor)
- instant horsepower reading/virtual dyno (factory ECU parameter)
This big screen mounts where the OEM navigation screen used to sit. Don't worry if your car did not come with GPS sat-nav, I can provide you with all the parts needed to install it(including the hood itself)!
Speaking of the hood, it will remain electronically actuated. At a press of a button, it will fold and open just like Mazda intended it to. The tilt button also toggles between 5 positions.
If driven at night and so desired, the screen can be dimmed automatically so it won't bother you.
The kit in its most basic form includes the following:
- electronic control unit (mounts under the steering column)
- 7" color screen
- OEM navigation hood, with electric opening/tilting and backlit buttons (optional)
- all needed wiring looms and misc. hardware items such as oil filter adapter plate for oil press. and temp(if needed)
- installation manual
Optional extras:
- another 2.3" touchscreen that sits in the ashtray, also displays whatever you need it to
- Accurate Gauge Cluster kit - can be integrated with this system to turn the needles inside the OEM cluster into real gauges!
- what else you may wish for and I didn't think of it yet!
Have a look at it go! Remember, it doesn't have to look like this; the units of measurement(imperial or metric), layout, font, size, color, position, style, everything can be customised!
If you don't like it, you are free to tell me what to change or even better - build it yourself using a software you download on your PC!
Please remember that this product is made to order, to your spec and to your demands. This is why the price may seem high, but rest assured that the price is mostly for that big 7" at ~130$ a piece. Then I have to source a RX8 OEM navigation hood which goes for another ~200$ or so, then the price of custom made electronics and so on and so forth.
Installation instructions are provided as a Word document with plenty of pictures.
You can choose to buy a pre-modded sat-nav hood from this site, and the installation time will go down by 2-3 hours. If your car did not have sat-nav from factory, this is the best choice for you.
If your car had sat-nav, you can choose to install the screen yourself; or you can send your hood towards me and you will receive it back with the screen installed. There are install instructions on how to mod your existing hood.
When you select extra sensors, please note that I will include all the wiring needed and any mounting adaptors required. For example, for oil temp/pressure, I offer an oil filter adapter. For boost/EMAP, the sensor has a 1/8NPT you screw in your intake. For fuel pressure/temp, I can offer a 5/16 quick disconnect inline adapter.
After payment, please get in touch with me to discuss all details.
You can find me at ciprianrotary@gmail.com, on my FB page at this link or by whatsapp.
All such items are made to order.
Product Code: UGK
Product Condition: New
Updating Order Details
Please do not refresh or navigate away from the page!
Sunday, January 8, 2023
Goodbye 2003, hello 2023
My car had satnav as factory default but the screen was long dead and did not fold up or down. So I got this kit and swapped it in about an afternoon. I had trouble installing it and the seller was kind enough to do a video call to guide me even further. When it was said and done it worked perfectly. The screen updates very fast and also dims at night. I get about 70 psi of oil pressure at 9000 rpm and 16 psi at idle, which seems good to me.
Alexandros Piedro